Advanced Filters
Category
Manufacturer
300 PSI Shell Working Pressure 150 PSI Tube Working Pressure 300°F Temperature *Pressure Tested* ...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
2.82 Oz Shot Size 25,000 PSI Injection Pressure Removed from: 55 Ton Van Dorn Demag Injection Mol...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 Oz Shot 20,300 PSI Injection Pressure 5.3" Injection Stroke 1.18" (30 mm) Screw Diameter 20:1 L...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 Oz Shot Size 1.18" (30 mm) Screw Diameter 20,300 PSI Injection Pressure 5.3" Injection Stroke 3...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Tie Bar
Removed from:
85 Ton Van Dorn Injection Molding Machine
Model: 85-RS-3F-HT
Serial: 05...
$595 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Tie Bar
Removed from:
85 Ton Van Dorn Injection Molding Machine
Model: 85-RS-3F-HT
Serial: 05...
$595 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Tie Bar
B 68978
Removed from:
85 Ton Van Dorn Injection Molding Machine
Model: 85-RS-3F-HT
S...
$595 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
ID NO: 31MN287061G001VX Type: P 15 HP Volt: 230/460 Amp: 39.4/19.7 Hz: 60 RPM: 1180 Phase: 3 Fram...
$1,450 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 Oz Shot 20,300 PSI Injection Pressure 5.3" Injection Stroke 1.18" (30 mm) Screw Diameter 20:1 L...
$1,495 (USD)
3 Oz Shot 20,300 PSI Injection Pressure 5.3" Injection Stroke 1.18" (30 mm) Screw Diameter 20:1 L...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 Oz Shot 20,300 PSI Injection Pressure 5.3" Injection Stroke 1.18" (30 mm) Screw Diameter 20:1 L...
$1,495 (USD)
Removed from: 85 Ton Van Dorn Injection Molding Machine Model: 85HT3 Serial: 0701 3 Oz Shot 20,30...
$1,495 (USD)