Advanced Filters
Category
Manufacturer
1/2 HP 200 Volts 50/60 Hz RPM 1410 Frame F-71M Removed from: 180 Ton Sumitomo Injection Molding M...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Volt AC 480 Freq 60 Hz Motor 30 kw Heater 12.1 Shaft: 13 3/4" x 1 1/2" Dimensions: 33 x 18 x 12 3...
$1,177 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft: 3 1/4" A 0X112 Expedited shipping services are available This piece is located at Ideal Ma...
$1,200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
17 kW (23 HP) 2000 RPM C132MP Frame 8 Pole 173 Volt 58.1 Amp Type TM-8 Removed from: 180 Ton Sumi...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: H-390CA2 Mfg No. 237C Removed from: 265 Ton Kawaguchi Injection Molding Machine Model: JEK...
$45 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Type: TC-F/FB-1 1 HP 4 Pole 1430/1740 RPM F-80M Frame 200/220 Volt 50/60 Hz 3.9/3.3 Amps 3" Shaft...
$395 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1 HP 1730 RPM F-20M Frame 200 Volt 3 Phase 60 Hz 3.4 Amps 4 Pole 2" Shaft Length 28.39 mm Shaft D...
$395 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
AC Servo Motor CNVM-4095-SV-B-13 Input: 0.4 kW 2000 RPM w/ Magnet Brake Type: FB-05A 200 VAC Remo...
$395 (USD)
CNVM-4095-SV-B-13 Input: 0.4 kW 2000 RPM w/ Magnet Brake Type: FB-05A 200 VAC Removed from: 35 To...
$395 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Cyclo Drive Input: 0.4 kW 2000 RPM Cyclo Drive: CNVM-4095-SV-V-13 Ratio 13 Serial No. C2057773 AC...
$395 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
0.8 KW 3 PH F-100 Frame 900 R/Min 90 Volt 30 Hz Removed from: 35 Ton Sumitomo Injection Molding M...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
H-170CA2 Expedited shipping services are available This piece is located at Ideal Machinery, Inc....
$199 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.