Advanced Filters
Category
Manufacturer
Cylinder Bore: 32 mm Nominal Pressure: 14 MPa Rod Diameter: 14 mm Proof Pressure: 21 MPa Stroke: ...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1500 Watt 200 Volt 7.5 Amp 3000 r/min Shaft Length: 2" Shaft Diameter: 17 mm Expedited shipping s...
$340 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Top / Bottom Flange: 7 x 7 Top Inlet: 2 7/8" Bottom Outlet: 2" Expedited shipping services are av...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: BM3ZSS-2P4 Removed from: 35 Ton Sumitomo Injection Molding Machine Model: SD35E Serial: MO...
$12 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Outside Diameter: 19 1/4" Inside Diameter: 16 5/8" Thickness: 1 1/4" Removed from: 60 Ton Demag E...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: M3545 HP: 1 Volt: 203-230/460 AMP: 3.7-3.6 / 1.3 Hz: 60 RPM: 3450 Phase: 3 Tested Good Rem...
$168 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SN 123.946 A Expedited shipping services are available This piece is located at Ideal Machinery, ...
$150 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Inside Diameter: 3.34" (85 mm) Front Bottom Link Removed from: 300 Ton Van Dorn Injection...
$349 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
83-13-055079 Mark I Expedited shipping services are available This piece is located at Ideal Mach...
$45 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
45 mm Removed from: 30 Ton Engel Injection Molding Machine Model: ES 80/30 Serial: 5156-030-92 Ex...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
305059 B 45568J Approx. Inside Diameter: 53 mm Removed from: 120 Ton Van Dorn Injection Molding M...
$249 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
230 Volt 50/60 Hz 18 kg Side Inlet / Outlet: 1 5/16" Top, 1 1/2" Middle Flange: 4 5/8" x 4 5/8" O...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.