Shaft Size: 1 7/8" Long 1.25" Diameter 3.5" Inlet 4.75" x 3.75" D. Hole Center to Center Expedite...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Model: 3520V35A-5 1AA-10-132 Expedited shipping services are available This piece is located at I...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

20 HP (15 kW) 1765 RPM 160L Frame 460 Volt 3 Phase 60 Hz 25 Amp 4.5" Shaft Length 42.0 mm Shaft D...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Model: 29-1474-2130 Series: 481 HP: 3 Volt: 180A / 200F AMP: 14.5 / 0.4 RPM: 1750 Frame: 215C 754...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Robot Systems Hand Held Robot Control Teach Pendant Ver: 2.1 Rev A Expedited shipping services ar...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Shaft: 4 7/8" Frame: 160M 230/460 Volt 60 Hz 36.8/18.4 Amp 1740 RPM 11 kW 4 Poles Powered on and ...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Cutler Hammer / Westinghouse RMS SYM Amps 100000 3 Phase 4 Wire 800 Amp 800 Neutral Amps 277/480 ...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Inside Diameter: Approx. 89.03 mm Dimensions: 8 x 8 x 6 3/4 Weight: 33 lbs Removed from: 185 Ton ...

$635 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Maco 8000 Process Module Control Software PN: 81EB-00341-C21-0-00 Maco-Net LNI PN: 81ZZ-02000 120...

$635 (USD)

Maco 8000 120 VAC 50/60 Hz 100 VA Max Control Software PN: 81EB-00206-CB1-0-01 Maco-Net LNI PN: 8...

$635 (USD)

1720 RPM Approx. Shaft Length: 1 5/8 Approx. Shaft Diameter: 20 mm Tested good Expedited shipping...

$635 (USD)

0.5 kW 175 Volt 2.8 Amp 200 Hz 3000 RPM w/ Gear Reducer SP 100-MF2-28 Dimensions: 17 1/2 x 4 7/8 ...

$635 (USD)