Advanced Filters
Category
Manufacturer
Mass: 112 kg
Max Flow: 61.1 L/min
Max Pressure: 20.6 MPa
208 Volt
3 Phase
Buyers are welcome...
$3,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
112 kg Mass
61.1 L/min Max Flow
20.6 MPa Max Pressure
208/220 Volt
3 Phase
with Daikin Solen...
$3,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 190 Ton Toshiba Injection Molding Machine Model: ISG190NV10-5B Serial: 056012 Exped...
$450 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Diameter: 45 mm
Shaft Length: 4"
V15SAJS-BRX-95S3
Removed from:
190 Ton Toshiba Injecti...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Solenoid Controlled Proportional Relief Valve Model: JRPD-G03-03-10-N Removed from: 165 Ton JSW I...
$118 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
LT2020A-10 10 kgf/cm2 Shell Side Pressure 7 kgf/cm2 Tube Side Pressure Pressure Tested Approx. Di...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Pressure Tested 2 Port Diameters: 2 1/8" 2 Port Diameters: 1 7/8" Approx. Dimensions: 33" x 6" x ...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
ZE-4-20-54-70 Expedited shipping services are available This piece is located at Ideal Machinery,...
$329 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Toshiba
Model: ISG150S10-5B
Serial: 516510
Expedited shipping services are avail...
$1,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Hydraulic Q Press Control & Check Valve Model: JQC-G06-2E-12 Expedited shipping services are avai...
$454 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
JRPD-G03-03-10-N Removed from: 165 Ton JSW Injection Molding Machine Model: J165EII-K Serial: 295...
$118 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: SRG03I13 Removed from: 160 Ton Nissei Injection Molding Machine Model: FS160S36ASE Serial:...
$120 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.