Advanced Filters
Category
Manufacturer
LAL363001021 3 Pole 300 Amp Removed from: 440 Ton Milacron Injection Molding Machine Model: NT440...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
15 HP (11 kW) / 18 HP (13.2 kW) 1455 / 1746 RPM 220-240 / 380-420 Volt 250-280 / 440-480 Volt 3 P...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Diameter: 64.9 mm Length: 58 1/4" Removed from: 120 Ton Toshiba Injection Molding Machine Model: ...
$795 (USD)
Diameter: 64.9 mm Length: 58 1/4" Removed from: 120 Ton Toshiba Injection Molding Machine Model: ...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
56.65 mm (2.23") Approx. Diameter Removed from: 85 Ton Van Dorn Injection Molding Machine Model: ...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shell: 250 PSI Tubes: 150 PSI Temp: 350° F Approx. Dimensions: 22" x 10" x 8.5" Removed from: 85 ...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
250 PSI Shell Operating Pressure 150 PSI Tube Operating Pressure 350° F Temperature *Pressure Tes...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 120 Ton Milacron Injection Molding Machine Model: VV120-7.58 Serial: S90A0500057 Ex...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Diameter: 64.9 mm Length: 58 1/4" Removed from: 120 Ton Toshiba Injection Molding Machine Model: ...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
P/N: SN523205016003 Approx. Dimensions: 22.5" x 9.75" x 6.75" Pressure tested OK Expedited shippi...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
34 HP (25 kW) 1765 RPM 180L Frame 440/460 Volt 3 Phase 60 Hz 41.3/40.8 Amps 4 5/8" Shaft Length 4...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4TP-0B127 7LED-01 NC8000F2 Removed from: 177 Ton Nissei injection Molding Machine Model: FS160S36...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.