Advanced Filters

Category

Manufacturer

Inventory

Used HORIUCHI MACHINERY Injection Sled Cylinder F7-SE 1CA 80B175N 465-CO #136207

17.5 MPa Working Pressure 175 kgf/cm2 Working Pressure 41" Shaft Length 45.37 mm Shaft Diameter R...

$425 (USD)

Used YUATSU SEIKO Valve C2G03044137 #136493

C2G-03-0.4-4137 Removed from: 60 Ton Toshiba Injection Molding Machine Model: ISf60PVL-1.5B Seria...

$40 (USD)

Used VICKERS Valve CVCS25C1S2W3511S26AP10 #136695

CVCS-25-C1-S2-W-35-11-S26-AP10 Removed from 400 Ton Van Dorn Injection Molding Machine Model: 400...

$145 (USD)

Used CINCINNATI MILACRON Die Height Drive Chain 50 #136655

Length 52" Removed from: 85 Ton Milacron Injection Molding Machine Model: VV85-11.84 Serial: S85A...

$100 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used WHITLOCK Drying Hopper DH-6.0FI #135865

Approx. 225 Lb Capacity DH-6 22.5" Inside Diameter 1.5" Inlet / Outlet Expedited shipping service...

$495 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used SHOWA 1.6 kVA Transformer 43443-2 #136187

1.6 kVA Single Phase 50/60 Hz Removed from: 390 Ton Toshiba Injection Molding Machine Model: ISF3...

$29 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used CECLA 5 kVA Transformer 43334 #136188

Primary: 3 x 220,380,415,460 Volt Secondary: 3 x 165 Volt, 5000 VA (5 kVA) 50/60 Hz Removed from:...

$77 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used HABERMANN Transformer HA8602 #136175

Primary: 3 x 380/400/420 VAC, 3 x 1.0 Amp Secondary: 24 VDC, 15 Amp 50/60 Hz Removed from: Wittma...

$129 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used ABB Logic Module LM022-C12RDC #135892

24 VDC 1SVR440610R0300 Removed from: 2000 Ton Van Dorn Injection Molding Machine Model: 2000H-RS-...

$110 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used CINCINNATI MILACRON Injection Sled Cylinder N5B-2.5X16 #135779

Shaft Length: 17" Shaft Diameter: 25.35 mm Removed from: 250 Ton Cincinnati Injection Molding Mac...

$299 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used WEST ELECTRONICS Temperature Control 6100 / TC #135859

90-264 VAC 50/60 Hz 4 VA Expedited shipping services are available This piece is located at Ideal...

$160 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Used SHEFFER Injection Sled Cylinder 3 1/4 HH A385 #135816

Shaft Length: 78" Shaft Diameter: 50 mm Removed from: 330 Ton Husky Injection Molding Machine Mod...

$399 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.