Advanced Filters
Category
Manufacturer
100 PSI Design Pressure 150 PSI Test Pressure 230°F Max Working Temp 4.97" "A" Dimension Dimensio...
$395 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 308147ST 19.13 mm (0.75") Approx. Diameter Removed from: 85 Ton Van Dorn Demag Injection M...
$85 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
LR2 D3353 600 Volt Range: 23...32A Removed from: 33 Ton Cincinnati Milacron Injection Molding Mac...
$24 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
6" Wide 12' Length Expedited shipping services are available This piece is located at Ideal Machi...
$60 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
M8 x 1.25 2" Single Face 1/2 B/M Part Dims: 8 5/8 x 2 x 3/4 Part Dims: 7 5/8 x 2 x 3/4 Expedited ...
$90 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SDN2.5-24-100P 24 VDC/2.5 A 115/230 VAC 1.3-0.7 A 50/60 Hz Expedited shipping services are availa...
$20 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
M8 x 1.25 2" Single Face 1/2 B/M Part Dims: 8 5/8 x 2 x 3/4 Part Dims: 7 5/8 x 2 x 3/4 Expedited ...
$90 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
115/230 VAC 1.3-0.7 Amp 50/60 Hz Tested Good Expedited shipping services are available This piece...
$20 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
M8 x 1.25 1/2 M/B 2" Single/Face S2 Part Dims: 8 5/8 x 2 x 3/4 Part Dims: 7 5/8 x 2 x 3/4 Expedit...
$90 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: C3JK06 #14-20 AWG Wire Range 15 in/lb Torque Removed from: 85 Ton Van Dorn Demag Injection...
$30 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Diameter: 19.06 mm (0.75") Removed from: 85 Ton Van Dorn Demag Injection Molding Machine ...
$85 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: QF 3 C 10B1 4500 PSI Max. Pressure P, A, B 1000 PSI Max. Pressure T Expedited shipping ser...
$108 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.