Advanced Filters
Category
Manufacturer
Model: B0154FLF2USH02 Type: IKKH HP: 15 Volt: 230/460 AMP: 37/18.5 Hz: 60 RPM: 1775 Phase: 3 Fram...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 275 Ton Niigata Injection Molding Machine Model: NE275UA4 Serial: 3568F Expedited s...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 330 Ton Husky Injection Molding Machine Model: GL300GEN-RS85/70 Serial: 2138895 Exp...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from 120 Ton Van Dorn Injection Molding Machine Model: 120-RS-6-F-HT Serial: 298 Expedite...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Pressure Tested Shell: 10 Kg Tube: 5 Kg Approx. Dimensions: 31" x 8" x 10" Removed from: 150 Ton ...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
UKTM 1024-4-T-CU-01 MIT 2 x R3/4" RAL 703 5.33 Liter Shell Volume 5/95°C Ts min/max Shell 3.5 MPa...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: HF01H238T Stroke Length: 2 1/2 Stroke Diameter: 31.5 mm Removed from: 650 Ton Van Dorn HT ...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Tube-in-Shell 5 HP Expedited shipping services are available This piece is located at Ideal Machi...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 165 Ton JSW Injection Molding Machine Model: J165EII-A Serial: 296302428 Expedited ...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Voltage: 115/230 VAC Power: 51.5 Watt 50/60 Hz Tested good Expedited shipping services are availa...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 165 Ton JSW Injection Molding Machine Model: J165EII-A Serial: 296302428 Expedited ...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
55.6 mm Hole Diameter Removed from: 250 Ton Engel Injection Molding Machine Model: ES200/330/250 ...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.