Advanced Filters
Category
Manufacturer
360 Volt 150 Hz 28 kW 3000 RPM Io: 83 A Mo: 100 Nm Dimensions: 19 1/2 x 8 1/2 x 12 Weight: 124 lb...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
339110 Removed from: 500 Ton Van Dorn Injection Molding Machine Model: 500-RS-60-HT Serial: 256 E...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
23.8 Oz Shot Size 2.48" (63 mm) Screw Diameter 25,030 PSI Injection Pressure Dimensions: 136" x 3...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
NIV Control Removed from: 220 Ton Sumitomo Injection Molding Machine Model: SH220-NIV-A Serial: M...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4.75" Middle Opening 1.75" Middle Inside (2) 2 5/8" End Openings (6) 1 5/8" Side Openings Removed...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Inside Diameter: 128 mm Removed from: 440 Ton Cincinnati Milacron Injection Molding Machine Model...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
W/ 0 811 402 514 4 WRPEH6C3B12L-2X/G24K0/A1M Removed from: 110 Ton Ferromatik Injection Molding M...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
ACS850-04-078A-5+J410+L517 ACS-CP-U ACS850-04-078A-5 JCU-11 / Rev B Removed from: 300 Ton Van Dor...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Frame: 256T HP: 25 RPM: 1750 Bus VDC: 640 RMS Amp: 49.4 Shaft: 4 1/4" Dimensions: 35 x 12 x 16 We...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 230 Ton Van Dorn Injection Molding Machine Model: 230HT14 Serial: 0956 Expedited sh...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
12 Oz Shot Size 1.968" (50 mm) Screw Diameter 17,400 PSI Injection Pressure 7.1" Injection Stroke...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
16.9 Oz Shot Size 1.97" (50 mm) Screw Diameter Removed from: 200 Ton Mannesmann Demag Injection M...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.