Advanced Filters
Category
Manufacturer
Removed from: 300 Ton Van Dorn Injection Molding Machine Model: 300-RS-30F HS-HT Serial: 2558 Exp...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Air Cooled 2 Ton 2 HP Compressor 1/2 HP Process Pump 30°F Minimum Temperature 60°F Maximum Temper...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
65 mm (2.56") Four Corners 50 mm (1.97") Center 50207 Removed from: 200 Ton Negri Bossi Injection...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5 Ton Air Cooled Year: 1988 Mold-Cool Control 2.5 HP Compressor 2 HP Pump 26.3 Amps Max R-22 Refr...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Air Cooled 2 Ton 2 HP Compressor .5 HP Process Pump (2) 50 Watt Condenser Fans R-22 Refrigerant @...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Maco 120 VAC 50/60 Hz Tested Good Expedited shipping services are available This piece is located...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5K405JL330V HP: 75 Volt: 230/460; Tested at 460 Amp: 91 Hz: 60 RPM: 1185 Phase: 3 Frame: 405Y Tes...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
2.08 Oz Shot Size 1.18" (30 mm) Screw Diameter 3.94" Injector Stroke 22,480 PSI Injection Pressur...
$3,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Rev. D0 Output: 3 x 0 ... 480 VAC, 0...15.1 Amp, 0...15.1 Amp, 0...500 Hz Removed from: Engel Rob...
$3,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
240 Volt, 3 PH
10 HP
Closed Rotor
3 Blade
1/4" Screen
Throat Size: 10 x 12
Tested Good
Exp...
$3,450 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Dimensions: 27 x 11 1/2 x 7 Weight: 26 lbs Removed from: 88 Ton Nissei Injection Molding Machine ...
$3,450 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
17 Oz Shot Size Dimensions: 93" x 42" x 27" Weight: 2,740 lbs Removed from: 135 Ton Ferromatik Mi...
$3,450 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.