Advanced Filters
Category
Manufacturer
BOSCH Servo Valve 0 811 404 602
Removed from:
1100 Ton Milacron Injection Molding Machine
Mode...
$2,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Motor P44G0719C
Part No: 339431
100 HP
1185 RPM
445TSC Frame
230/460 Volt
3 Phase
60 Hz
2...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
0 811 402 611
0 811 404 602
Expedited shipping services are available
This piece is located at...
$2,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
UDC-55
5.25" Holes Center to Center
55 lbs/hr
460 Volt
Single Phase
60 Hz
26 Amp
12 kVA Co...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
T-1270 Circuit Board: 4TP-OBI27 GP41-902086 Expedited shipping services are available This piece ...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4 Ton 1.5 HP Pump Size Air Cooled Compressor 5 R-22 Refrigerant 14 Amp 460 Volt 3 Phase 60 Hz Exp...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
8.3 oz ? Dimensions: 117" x 24" x 29" Weight: 2,090 lbs Removed from: 300 Ton Husky Injection Mol...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
100 HP 1185 RPM 445TSC Frame 460 Volt 3 Phase 60 Hz 226/113 Amps **Tested at 460 Volt** Removed f...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
16" x 20" Throat Size 3 Blades 480 Volt 3 Phase 60 Hz 40 Amp *missing drawer* with Baldor Motor C...
$12,000 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Unilog 4000 with Keys Removed from: 150 Ton Battenfeld Injection Molding Machine Model: BA 1500/1...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
10.32 Oz Shot Size 1.772" (45 mm) Screw Diameter 30,502 PSI Injection Pressure 7.87" Injection St...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
246.63 Oz Shot 21,149 PSI Injection Pressure 52 kW Heater 4.72" (120 mm) Screw Diameter 133 RPM S...
$12,500 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.