Advanced Filters
Category
Manufacturer
2.00 kVA
230/460/575 Primary Voltage
95/115 Secondary Voltage
Single Phase
50/60 Hz
Type IP
...
$115 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Minimum Object Size: 0.75in 919mm) Range: 1-30ft (0.3-9.1m) Expedited shipping services are avail...
$595 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Staffa HM/C080/0/6C/45/F3/C17/31/PL458 Motor
Buyers are welcome to inspect equipment prior to pu...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4WE 6 D62/EG24N9K4
Removed from:
40 Ton Van Dorn Demag Injection Molding Machine
Model: Ergote...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Dual Element Time Delay Current Limiting 20 Amp 600 Volt Tested Expedited shipping services are a...
$6 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 Zone
with (3) Used XIN LEI Hot Runner Cards
Expedited shipping services are available upon re...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: ES330/85
Serial: 9280-085-98
Year: 1998
85 Ton
6.5 Oz Shot Size
Toggle Clamp
C-Frame...
$14,500 (USD)
Dual Zone
208-240 VAC
10-3 Wire
20 Amps
10 Amp AC
with (2) Used PCS Hot Runner Cards
Expedi...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: W631 Dimensions: 71 1/2 x 5 x 3 1/4 Weight: 42 lbs Removed from: Wittmann Robot Model: W63...
$454 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 150 Ton Engel Injection Molding Machine Model: ES 600/150 Serial: 3985-150-91 Exped...
$499 (USD)
ID: 89.03 mm Dimensions: 8 x 8 x 6 3/4 Weight: 33 lbs Removed from: 185 Ton HPM Injection Molding...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 275 Ton Niigata Injection Molding Machine Model: NE275UA4 Serial: 3568F Expedited s...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.