Advanced Filters
Category
Manufacturer
Max Speed: 6000 RPM Stall Torque: 2.0 Nm/18.0 lb-in RMS Current: 2.1 Amps 40ºC Bulletin 1326 Expe...
$1,136 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Series A Max Speed: 5500 RPM Max Cont. Output Power: 1.0 kW 40°C Max Cont. Stall Torque: 2.1/18 N...
$1,136 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Max Speed: 6000 RPM Stall Torque: 2.0 Nm/18.0 lb-in RMS Current: 2.1 Amps 40ºC Bulletin 1326 Expe...
$1,136 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Catalog No. U7T2C-P 254T Frame 460 Volt 3 Phase 6-60 Hz Range 7.5 HP 1785 RPM 9.2 Amp 4.25" x 1 5...
$1,150 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Catalog No. U7T2C-P 254T Frame 460 Volt 3 Phase 6-60 Hz Range 7.5 HP 1785 RPM 9.2 Amp 4.25" x 1 5...
$1,150 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
G/7/0/EH Expedited shipping services are available This piece is located at Ideal Machinery, Inc....
$1,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
17 kW (23 HP) 2000 RPM C132MP Frame 8 Pole 173 Volt 58.1 Amp Type TM-8 Removed from: 180 Ton Sumi...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Engel Injection Molding Machine
Model ES 200/400
Serial: 2749-400-82
Expedited s...
$199 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Tested Good
Buyers are welcome to inspect equipment prior to purchase.
Expedited shipping servi...
$189 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed From: Engel Injection Molding Machine
Model: ES 330/85
Serial: 5237-085-92
Expedited s...
$179 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Sumitomo Injection Molding Machine
Model: SH100-NIV A
Serial: MOBH0321
Expedited...
$150 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft length: 2"
Shaft diameter: 22.75 mm
Removed from: Muller Packaging Systems
Model: 503
S...
$149 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.