Advanced Filters
Category
Manufacturer
Model: 3492744-03 HP: 24 kW: 18 Volt: 230/460 AMP: 60/30 Hz: 60 RPM: 1760 Shaft Diameter: 42.07 m...
$454 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft: 4 1/4" x 1 3/4" Frame: 286U 20 HP 1755 RPM 460 Volt 24.3 Amp 60 Hz Expedited shipping serv...
$454 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Diameter: 5/8" 2 HP 208-230/460 Volts 5.9-5.6/2.8 Amps 3450 RPM Frame: 56CZ 60 Hz 3 Phase T...
$136 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Demag Motor KBA 71 A 4 60 Hz 280/480 Volt 0.44 kW / 1/2 HP 1670 RPM 2.3/1.3 Amp Demag Motor KBA 8...
$129 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
300 LJ Removed from: 85 Ton Cincinnati Injection Molding Machine Model: VST85-2.97 Serial: S85A03...
$79 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Demag Motor KBA 71 A 4 60 Hz 280/480 Volt 0.44 kW / 1/2 HP 1670 RPM 2.3/1.3 Amp Demag Motor KBA 8...
$129 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5 kW
6000 RPM
540 Volt
8 Amp
Brake: 24 Volt
with Graessner GmbH DynaGear
5.00:1
Removed fr...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1 5/8" Shaft Length
28.2 mm Shaft Diameter
Removed from:
400 Ton Van Dorn Injection Molding Ma...
$82 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
101 2169 009
1 5/8 INCH SHAFT
28.4 MM SHAFT
Removed from:
300 Ton Van Dorn Injection Molding ...
$82 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1 5/8" Shaft Length
27.9 mm Shaft Diameter
Removed from:
300 Ton Van Dorn Injection Molding Ma...
$82 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
151-0244
2 1/4 INCH SHAFT
31.9 MM SHAFT
Removed from: Engel Injection Molding Machine
Model: ...
$140 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Expedited shipping services are available This piece is located at Ideal Machinery, Inc. on our s...
$79 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.