Advanced Filters
Category
Manufacturer
3-Mot EN60034 50/60 Hz 0.25/0.30 kW (0.33/0.40 HP) 1/min 1440/1740 230/277 / 400/480 Volt Expedit...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 1FT5074-0AC01-2-Z 2" Shaft Length 24 mm (0.95") Shaft Diameter Expedited shipping services...
$600 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
24872
J91PM5280
C25932
Removed from:
120 Ton Van Dorn Injection Molding Machine
Model: 120-R...
$1,295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
17 kW (23 HP) 2000 RPM C132MP Frame 8 Pole 173 Volt 58.1 Amp Type TM-8 Removed from: 180 Ton Sumi...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
ID No: 13MN440743 G002 DB Type: P HP: 125 Volt: 230/460; Tested at 460 Amp: 278/139 Hz: 60 Phase:...
$8,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Motor Spec: A06B-0337-B075 30 kW Output 182 Volt 3 Phase 133 Hz 97.7 Amp 2000 RPM 6" Shaft Length...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
No: UH6291246 Type: K HP: 40 Volt: 230/460 Amp: 95.4/47.7 Hz: 60 RPM: 1185 Phase: 3 Frame: 364TSC...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
OMPA 250 151-51 77
Expedited shipping services are available This piece is located at Ideal Mach...
$280 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
OMP 160 151-70657
Approx. Shaft Length: 1 3/4" Approx. Shaft Diameter: 25.54 mm Removed from: 55...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 880 Ton Van Dorn Injection Molding Machine
Model: 880SP4300
Serial: 0167
Expedit...
$349 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1 INCH ROD
8.5 MM ROD
Removed from:
230 Ton Van Dorn Injection Molding Machine
Model: 230HT12...
$229 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Dimensions: 8" x 8" x 5"
Removed from:
300 Ton Van Dorn Injection Molding Machine
Model: 300RS...
$149 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.












