Advanced Filters
Category
Manufacturer
Elwood/Gettys Permanent Magnet AC Servo Motor High Performance Motors Permanently Lubricated Ball...
$450 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Approx. Size: 4" x 3/4" 750 Watt 200 Volt 4.1 Amp 2.39 Nm 3000 r/min **Unit has a chip** Di...
$400 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Approx. Size: 4" x 3/4" 750 Watt 200 Volt 4.1 Amp 2.39 Nm 3000 r/min **Unit has a crack** D...
$400 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
179 Volt 11 Amp 3.0 kW 1500 RPM 100 Hz 4" Shaft Length 71.8 mm Shaft Diameter Removed from: Fanuc...
$409 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 3462151-10 HP: 17 kW: 12.6 Volt: 230/460 AMP: 42/12 Hz: 60 Shaft Diameter: 42.09 mm Shaft ...
$409 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: WAF 134ML4 kW: 7.5 Volt: 380-420 AMP: 16.8 Hz: 50 RPM: 1455 Single Phase Shaft Diameter: 3...
$409 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
10 HP Frame: L 215T 460 Volts 3 Phase 1755 RPM 11.9 Amps Shaft: 3 3/8" Expedited shipping service...
$409 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Inner Diameter of Both Ends: 54 mm & 38 mm Outer Diameter: 104 mm (4") Expedited shipping service...
$349 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
140 kW
3000 RPM
360 Volt
150 Hz
240 Amp
Shaft Length: 5.5"
Shaft Diameter: 60.27 mm
with G...
$13,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
2000H-RS-260F / CPL Removed from: 2000 Ton Van Dorn Injection Molding Machine Model: 2000H-RS-260...
$449 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Die Height Motor Mount 2 3/4" Inner Diameter 1/2" Inner Diameter Removed from: 85 Ton Van Dorn In...
$199 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 500 Ton Van Dorn Injection Molding Machine Model: 500H-RS-60-F-V-LP Serial: 676 Exp...
$229 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.