Advanced Filters
Category
Manufacturer
Sold
Removed from:
2000 Ton Engel Injection Molding Machine
Model: ES23050/2000DU
Serial: 0680/2000...
$92 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
90 mm Shaft to Shaft Alpha Series 6 Stop SMS-3 Curve Motion Right Hand Cam Torque Limiter T and U...
$495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
with Gardner Denver Blower Model: HYCMHBA 4000 RPM Max with Toshiba Motor Model: 0104SDSR41A-P 10...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
3-531-4361A Removed from: 220 Ton Cincinnati Milacron Injection Molding Machine Model: VT220-17 V...
$1,240 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
Removed from: Engel Robot & Cabinet ERC 43/2-E Serial: 162097 Expedited shipping services are ava...
$425 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
Moyno Products Progressing Cavity Pump Baldor Motor Serial: W7-94 SPEC: 34-3885-2328 HP: .5 Volt:...
$125 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
Removed from:
500 Ton HPM Injection Molding Machine
Model: T500-32
Serial: 91481
Buyers are w...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
RATIO VALVE RECEIVER INJECTION MOLDING FLOW CONTROL
115 V
F.L.AMPS 0.1
PH 1
HZ 60
Inlet: 2"
...
$149 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
B-1003-C4-F Pressure Tested Shell 250 PSI Tubes 150 PSI Approx. Dimensions: 34" x 7" x 9" Expedit...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
Shell & Tube, Air Cooled, Plate Ac Dims 22 3/4 x 9 x 7 3/4 Pressure tested OK Approx. Dimensions:...
$795 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
45 KVA Primary Voltage 480 Secondary Voltage 400V 60 HZ Tested Good Weight 140 Lbs. Removed from:...
$799 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Sold
D10P0S-01 NC8000F Removed from: 210 Ton Nissei Injection Molding Machine Model: FS210S50ASE Seria...
$800 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.












