Advanced Filters
Category
Manufacturer
Modular Hopper 929752
300 lb Capacity
5.5" Extended Top
20.5" End to End Top
6" Flange
2" In...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1.10" (28 mm) Screw Diameter
Removed from:
80 Ton Krauss Maffei Injection Molding Machine
Mode...
$1,895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. .87 Oz. Shot Size
Removed from:
40 Ton Van Dorn Demag Injection Molding Machine
Model:...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
29 HP Motor UD 1002/71664652-1
29 HP (21.3 kW)
1765 RPM
460 Volt
3 Phase
60 Hz
34.5 Amp
4....
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
13.5 Oz Shot Size
1.97" (50 mm) Screw Diameter
25,000 PSI Injection Pressure
8.46" Injection S...
$1,895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. 40 mm Screw Size
Removed from:
110 Ton Ferromatik Milacron Injection Molding Machine
M...
$1,895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
NEWBURY 1.7 Oz Injection Unit V2-30BRS / IU
1.7 Oz Shot Size
1" (25 mm) Screw Diameter
25,000 ...
$1,895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
NEWBURY 1.7 Oz Injection Unit V2-30BRS / IU
1.7 Oz Shot Size
1" (25 mm) Screw Diameter
25,000 ...
$1,895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
VAN DORN 5 Oz Injection Unit 85-RS-5FHT / IU
5 Oz Shot Size
1.38" (35 mm) Screw Diameter
20,20...
$1,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. 8.2 oz shot size
Removed from:
200 Ton Engel Injection Molding Machine
Model: ES650/20...
$1,995 (USD)
10" x 12" Throat Size
10 HP
2 Blade
Open Rotor
240 Volt
3 Phase
60 Hz
26 Amps
Tested Good...
$2,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
6.7 Oz Shot Size
Removed from:
150 Ton Sumitomo Injection Molding Machine
Model: SH150-NIV A
...
$1,695 (USD)