Advanced Filters
Category
Manufacturer
60 Oz Shot Size 20,400 PSI Injection Pressure 14.31" Injection Stroke 3.15" (80 mm) Screw Diamete...
$8,950 (USD)
60 HP 1190 RPM 404TSC Frame 575 Volt 3 Phase 60 Hz 59.8 Amp (2) 4.5" Shaft Length (2) 53.4 mm (2....
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Part No: 19382 75 HP 1185 RPM 405TSC Frame 230/460 Volt 3 Phase 60 Hz 181/90.8 Amps 4.5" Shaft Le...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
75 HP 1800 RPM 365TD Frame 460 Volt 3 Phase 8.8 Amp Shaft Length: 5 7/8" Shaft Diameter: 55.5 mm ...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5 Oz Shot Size Removed from: 60 Ton Van Dorn Demag Injection Molding Machine Model: 60VTC5 Serial...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
60 HP 1190 RPM 404TY Frame 230/460 Volt 3 Phase 60 Hz 135.8/67.9 Amps 4.5" Shaft Length 53.5 mm (...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
22 KW 3 Phase Poles 10 Volt 200 Hz 125 Amp 73 JEC2100 Removed from: 200 Ton JSW Injection Molding...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
75 HP 1185 RPM 405TSC Frame 460 Volt 3 Phase 60 Hz 85 Amps 4" Shaft Length 53 mm Shaft Diameter *...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
70 PSI Air Pressure
11 lbs Recommended Max Load
90° Air Cylinder Posture
10.9 ft-lbs Posture T...
$9,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
75 HP 1185 RPM 405TSC Frame 460 Volt 3 Phase 60 Hz 230/460 Volt 170/85 Amps **Tested at 460 Volt*...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
75 HP 4.5" Shaft Length 54 mm Shaft Diameter Tested Good Removed from: 385 Ton Van Dorn Injection...
$2,350 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from:
120 Ton Van Dorn Injection Molding Machine
Model: 120-RS-6F-HT
Serial: 321
Expe...
$449 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.