Advanced Filters
Category
Manufacturer
50 Amp 600 VAC 250 VDC 3 Pole 40°C Ambient Comp. Removed from: 400 Ton Van Dorn Injection Molding...
$30 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
308396 F1 Approx. 38 mm (1.5") Removed from: 85 Ton Van Dorn Injection Molding Machine Model: 85H...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
115 mm (4.53") 32 mm (1.26") 85 mm (3.35") Removed from: 300 Ton Cincinnati Milacron Injection Mo...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
090906 Removed from: 200 Ton Negri Bossi Injection Molding Machine Model: 700H-200 Serial: 69-561...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
100-222-051, Rev C Memory Board Expedited shipping services are available This piece is located a...
$65 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Series B 600 VAC Coil: 115-120 Volt, 60 Hz Volts 120-600, 50 Hz Expedited shipping services are a...
$18 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Source: 24 VDC 3 Amp 250 VAC Removed from: 210 Ton Nissei Injection Molding Machine Model: FS210S...
$18 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
17001 ST Removed from: 500 Ton Van Dorn Injection Molding Machine Model: 500-RS-125F-HT Serial: 2...
$295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
12 Volt 0.15 Amp Removed from: Gammaflux 36 Zone Hot Runner Control Model: GLC2K-H030D-11 Expedit...
$7 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Inner Diameter: 7 7/8" Diameter of Mounting Holes: 1 1/8" Removed from: 500 Ton Van Dorn Injectio...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
6593913 Removed from: 80 Ton Nissei Injection Molding Machine Model: FS80S12ASE Serial: S08E124 E...
$74 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
HGW30CCH Expedited shipping services are available This piece is located at Ideal Machinery, Inc....
$48 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.