Advanced Filters
Category
Manufacturer
160/133 CFM Open @ 60/50 Hz with Emerson Electric Motor Model: J810X 2.5 / 1.85 HP J56CZ Frame Te...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1 7/8" Inlet / Outlet 1 1/8" Inlet / Outlet *Pressure Tested* Approx. Dimensions: 39" x 6" x 9" R...
$895 (USD)
7.5 kVA 575 High Voltage, 7.5 Amps 440Y/254 Low Voltage, 9.8 Amps Type 2 Enclosure 3 Phase 60 Hz ...
$899 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 Phase, Insulated Type: SO 7.5 kVA 60 Hz H.V.: 575 H.V. Amps: 7.530 L.V.: 230Y/133 L.V. Amps: 18...
$899 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
45 kVA Delta / Delta Primary Volt: 200/240/400/480 Vrms L-L Secondary Volt: (19-20-21) = 220/127 ...
$905 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Oil Filter w/ Pump 115/208-230 Volt Single Phase Cat: 88514 Spec. 34G510-5506 Frame: 48YZ .25 HP ...
$950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
24 VAC Removed from: 40 Ton Engel Injection Molding Machine Model: ES 200/40HL Serial: 29303 Expe...
$15 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 2TP-3A240 N9SPC-00 w/Cosel YS505 Expedited shipping services are available This piece is l...
$272 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SBC200F2 Removed from: AEC HYdreclaim Control Optimus Series OS Blending System Expedited shippin...
$71 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: AA10VS045DFR1/31R-PKC62K02 ? Approx. Shaft Length: 1 5/8" Approx. Shaft Diameter: 25 mm Re...
$699 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5000 RPM Max
230 Volt
3 Phase
Shaft length: 3 1/8"
Shaft diameter: 4 1/2"
Buyers are welcome...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
ASSY: 330-021
Removed from:
85 Ton Van Dorn Injection Molding Machine
Model: 85RS-3FHT
Serial...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.