Input: 24VDC +/-20% 1.4A 19 mm / 30 mm / 41 mm Min. Obj. Size Range: 0.3-20 m <20 ms Response Tim...

$200 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Series Nine Four Zone Tested Good Expedited shipping services are available This piece is located...

$130 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Output: ±15 VDC AC Input: 47-63 Hz Max Current/Fuse Rating: 0.5 Amp/0.25 Amp Removed from: 500 To...

$10 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

200-550 Volt 19-45 kW 80-75 Amp Coil: 200-240 Volt 50/60 Hz Removed from: 150 Ton Sumitomo Inject...

$79 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

24 VDC 18 Watt Removed from: 150 Ton Sumitomo Injection Molding Machine Model: SH150A Expedited s...

$52 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Single Phase Primary: 230V/230V Secondary: 240 Volt 50/60 Hz Removed from: 190 Ton Toshiba Inject...

$40 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Pathfinder 4500 Control Card Assy: 330019 Rev. C Removed from: Van Dorn Injection Molding Machine...

$99 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

24-48 V Series B Expedited shipping services are available This piece is located at Ideal Machine...

$5 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

59.03 mm (2.33") Approx. Diameter End Holes 38.98 mm (1.54") Approx. Diameter Center Hole 5" Widt...

$299 (USD)

Model: 185-0010/1 Paneltec Expedited shipping services are available This piece is located at Ide...

$45 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Rev A Camac VEL Expedited shipping services are available This piece is located at Ideal Machiner...

$340 (USD)

Model: Z9448282B CTI 605 Removed from: 500 Ton Van Dorn Injection Molding Machine Model: 500HT Se...

$40 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.