Advanced Filters
Category
Manufacturer
Pathfinder 4500 Control Card Assy: 330019 Rev. C Removed from: 400 Ton Van Dorn Injection Molding...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 308146 47031J Rear Toggle 47.37 mm (1.87") Approx. Diameter Removed from: 85 Ton Van Dorn ...
$181 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
100 mm (3.94") Approx. Diameter Large Hole 5 mm (0.20") Approx. Diameter Small Hole Removed from:...
$299 (USD)
200 VAC 50/60 Hz 3 Phase 1 Amp Powered On & Tested Dims: 24" x 10 1/4" x 24" Wt: 41 lbs Expedited...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Volt: 440/480 Watt: 3000/3570 1280 x 201 39.5" Length End to End 7 7/8" Width 77040 213178 Expedi...
$150 (USD)
Model: DG20S4 0 12F 50 S553 Removed from: 33 Ton Cincinnati Milacron Injection Molding Machine Mo...
$181 (USD)
Power Requirements: 20-250 VAC/VDC, 3 VA Contact Rating: 5 Amp, 250 VAC Enclosure Type: NEMA 4, 5...
$315 (USD)
Model: ST307-V2-150-B 20-150 Bar 500 Bar Pmax Removed from: 33 Ton Cincinnati Milacron Injection ...
$200 (USD)
Approx. Diameter: 19 mm Removed from: 85 Ton Van Dorn Injection Molding Machine Model: 85-RS-3F-H...
$85 (USD)
200 VAC 50/60 Hz 3 Phase 1 Amp Powered On & Tested Dims: 24" x 10 1/4" x 24" Wt: 41 lbs Expedited...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Diameter: 19 mm Removed from: 85 Ton Van Dorn Injection Molding Machine Model: 85-RS-3F-H...
$85 (USD)
200 VAC 50/60 Hz 3 Phase 1 Amp Powered On & Tested Dims: 24" x 10 1/4" x 24" Wt: 41 lbs Expedited...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.