Advanced Filters
Category
Manufacturer
Removed from: 85 Ton Van Dorn Injection Molding Machine Model:85RS-5F-HT Serial: 242 Expedited sh...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Series 2H 3000 PSI Hyd Envelope Pressure 35 mm (1.38") Shaft Diameter 26.5" Stroke 71 008 010 50 ...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 kVA 600 Delta Primary Volts 240 Delta Center Tap Secondary Volts 3 Phase 60 Hz Tested Good Exp...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
(3) 2.5" Openings Removed from: 300 Ton Engel Injection Molding Machine Model: ES 600/200/300 Ser...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
21" x 19.25" Platen 55 mm (2.17") Four Corners 80 mm (3.15") Center Removed from: 200 Ton Negri B...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4WREE10W7520/G24K31/A1V Removed from: 90 Ton Milacron Injection Molding Machine Model: VV120-7.58...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
0 811 402 073 Removed from: 110 Ton Battenfeld Injection Molding Machine Model: BA1000/315 CDC Se...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4WRAP6W7042024K4M 535810/6* M12 6253777 X07966 Removed from: 150 Ton Krauss Maffei Injection Mold...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5.5" Inlet / Outlet 11" Flange Diameter with Baldor Motor Cat. No. M2394T 15 HP 3525 RPM 254T Fra...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
260 Bar Removed from: 50 Ton Arburg Injection Molding Machine Model: 320C 500-100U Serial: 178425...
$1,695 (USD)
Approx. Diameter: 87.0 mm Removed from: 250 Ton Engel Injection Molding Machine Model: ES200/330/...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 33" Shaft Diameter: 35.07 mm Removed from: 230 Ton Dorn Injection Molding Machine M...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.