Advanced Filters
Category
Manufacturer
H1693473 Removed from: 60 Ton Toshiba Injection Molding Machine Model: ISF60PVL-1.5B Serial: 5493...
$139 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
H1693473 Removed from: 60 Ton Toshiba Injection Molding Machine Model: ISF60PVL-1.5B Serial: 5493...
$139 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SII Injectvisor-SI Clamp Interface S1CLP Removed from: 120 Ton Toshiba Injection Molding Machine ...
$125 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
K35334G Removed from: 120 Ton Toshiba Injection Molding Machine Model: ISE120N-5A Serial: 613211 ...
$39 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Linear Transducer With Amplifier Unit: EDV208 FM55VD Removed from: 90 Ton Toshiba Injection Moldi...
$325 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
8.1 Oz Shot Size
1.57" (40 mm) Screw Diameter
26,600 PSI Injection Pressure
320 RPM Screw Spee...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Expedited shipping services are available upon request.
All taxes due are the responsibility of ...
$420 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Inner Diameter of Both Ends: 54 mm & 38 mm Outer Diameter: 104 mm (4") Expedited shipping service...
$349 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
0-250 kgf/cm² Approx. Diameter: 102.91 mm Approx. Fitting Diameter: 16.57 mm Dimensions: 5 3/8 x ...
$20 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
50 HP (37 kW)
4 Poles
1735/1745 RPM
180L Frame
208/230/460 Volt
3 Phase
60 Hz
128/116/58.0...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Toshiba Injection Molding Machine
Model: ISGS310V10-10Y
Serial: 724104
Expedited...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 15" Shaft Diameter: 44.9 mm Removed from: 610 Ton Toshiba Injection Molding Machine...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.