Advanced Filters
Category
Manufacturer
Removed from: 250 Ton Toshiba Injection Molding Machine Model: IOSE250N-9A Serial: S38103 Expedit...
$420 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: H0936891 Removed from: 120 Ton Toshiba Injection Molding Machine Model: ISE120N-5A SeriaL:...
$420 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOSHIBA H0936891 Circuit Board
Expedited shipping services are available upon request.
All taxe...
$420 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
H055060-2
Removed from:
120 Ton Toshiba Injection Molding Machine
Model: ISE120N-5A
Serial: 6...
$439 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
50 HP (37 kW) 6 Poles 1175 RPM 230/460 Volt 3 Phase 60 Hz 125/62.5 Amps 5.75" Shaft Length 65 mm ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Type: TIKK 50 HP (37 kW) 6 Poles 1175 RPM 440 Volt Only; Tested at 460 3 Phase 60 Hz 125/62.5 Amp...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOSHIBA 2.9 Oz Injection Unit ISF60PVL-1.5B / IU
2.9 Oz Shot Size
1.26" (32 mm) Screw Diameter
...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOSHIBA 8.1 Oz Injection Unit ISE120-5A / IU
8.1 Oz Shot Size
1.57" (40 mm) Screw Diameter
26,...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOSHIBA 15.9 Oz Injection Unit ISE250N-9A / IU
15.9 Oz Shot Size
1.97" (50 mm) Screw Diameter
...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4.8 Oz Shot Size
1.42" (36 mm) Screw Diameter
22,800 PSI Injection Pressure
350 RPM Screw Spee...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
8.1 Oz Shot Size 1.57" (40 mm) Screw Diameter 26,600 PSI Injection Pressure 320 RPM Screw Speed R...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
16 oz. shot size
Removed from:
190 Ton Toshiba Injection Molding Machine
Model: ISF190VL-10A
...
$3,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.