Advanced Filters
Category
Manufacturer
H086232-1
Removed from:
120 Ton Toshiba Injection Molding Machine
Model: ISE120N-5A
Serial: 6...
$180 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOSHIBA K35334G Circuit Board
Expedited shipping services are available upon request.
All taxes...
$39 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
H055060-2
Removed from:
120 Ton Toshiba Injection Molding Machine
Model: ISE120N-5A
Serial: 6...
$439 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
50 HP (37 kW) 6 Poles 1175 RPM 230/460 Volt 3 Phase 60 Hz 125/62.5 Amps 5.75" Shaft Length 65 mm ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Type: TIKK 50 HP (37 kW) 6 Poles 1175 RPM 440 Volt Only; Tested at 460 3 Phase 60 Hz 125/62.5 Amp...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOSHIBA 15.9 Oz Injection Unit ISE250N-9A / IU
15.9 Oz Shot Size
1.97" (50 mm) Screw Diameter
...
$1,995 (USD)
4.8 Oz Shot Size
1.42" (36 mm) Screw Diameter
22,800 PSI Injection Pressure
350 RPM Screw Spee...
$1,995 (USD)
00-7121 RK Removed from: 120 Ton Toshiba Injection Molding Machine Model: ISG120NV10-5B Serial: 0...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Toshiba Injection Molding Machine
Model: ISGS610V10-34AT
Serial: 837008
Expedite...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Toshiba Injection Molding Machine
Model: ISGS610V10-34AT
Serial: 837008
Expedite...
$385 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Injectrol V Board for Toshiba Injection Molding Machine Removed from: 390 Ton Toshiba Injection M...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Injector Hold Down Bolt Removed from: 120 Ton Toshiba Injection Molding Machine Model: ISG120NV10...
$29 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.