Advanced Filters
Category
Manufacturer
30 kVA 600 Delta Primary Volts 240 Delta Center Tap Secondary Volts 3 Phase 60 Hz Tested Good Exp...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
(6) 2.5" Openings (3) 1 5/8" Openings Removed from: 300 Ton Engel Injection Molding Machine Model...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
315 bar 24 Volt Removed from: 500 Ton Engel Injection Molding Machine Model: ES2000/500 Serial: 7...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Diameter: 87.0 mm Removed from: 250 Ton Engel Injection Molding Machine Model: ES200/330/...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
HT 20484 P3413764C Length: 121" Diameter: 4.25" (108.24 mm) Removed from: 300 Ton Van Dorn Inject...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
102.75 CJJ-2HTS13A 26.438 Series 2H 3000 PSI Hyd Envelope Pressure 33" Shaft Length 35 mm (1.38")...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
02.75 CJJ-2HTS13A 26.438 Removed from: 230 Ton Van Dorn Injection Molding Machine Model: 230-RS-3...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
302574-D 121493 Dimensions: 29 3/4 x 18 1/4 x 33 1/2 Weight: 1565 lbs Removed from: 170 Ton Van D...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: AA10VSO100 DFR1/31L PKC62N00 Part No.: 00941861 Vg = 100 cc n = 1800 RPM DR = 210 Bar 2 1/...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Diameters: 4.5", 6.25" GGG40ENGS C135188A Removed from: 250 Ton Engel Injection Molding Machine M...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Diameter: 87.0 mm Removed from: 250 Ton Engel Injection Molding Machine Model: ES200/330/...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Come with Manual Q3ACPU, 13XA30 0304B Expedited shipping services are available This piece is loc...
$1,695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.