Advanced Filters
Category
Manufacturer
CLB-0610 Pressure Tested 4 Inlet/ Outlet Diameters: 1 1/2" Approx. Dimensions: 27" x 6" x 7" Remo...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. Dimensions: 27" x 6" x 9" Removed from: 120 Ton Toshiba Injection Molding Machine Model: ...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1.75" Inlet / Outlet Removed from: 250 Ton Cincinnati Milacron Injection Molding Machine Model: V...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Pressure Tested Shell: 10 kg Tube: 5 kg 2 Inlet/Outlet Diameters: 1 1/2" 2 Inlet/Outlet Diameters...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
*Pressure Tested* Approx. Dimensions: 27" x 6" x 7" Removed from: 120 Ton Toshiba Injection Moldi...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shell Side Pressure: 10 Kgf/cm2 Tube Side Pressure: 5 Kgf/cm2 Min. Water: 10 l/min *Pressure Test...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: SC-N7 3NC4F Removed from: 390 Ton Toshiba Injection Molding Machine Model: ISF390SII-19B S...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
460 Volt 60 Hz 50 Amp 40 kVA Expedited shipping services are available This piece is located at I...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
UKTM 1024-4-T-CU-01 MIT 2 x R3/4" RAL 703 5.33 Liter Shell Volume 5/95°C Ts min/max Shell 3.5 MPa...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Operating Pressure Shell: 16 Bar / Tube: 25 Bar Operating Temperature Shell: 150°C / Tube: 90°C C...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
16/21 Bar Nominal Test Pressure 95°C Temperature *Pressure Tested* Approx. Dimensions: 30" x 6" x...
$695 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
PP25K31 3000 PSI Max Removed from: 170 Ton Van Dorn Injection Molding Machine Model: 170-RS-9.4F-...
$136 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.