Advanced Filters
Category
Manufacturer
60 lbs/hr 1 HP Blower Motor 460 Volt 3 Phase 60 Hz 10.8 Amp Tested Good Expedited shipping servic...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
40 lbs/hr 1/2 HP Blower Motor 5.57 kVA 460 Volt 3 Phase 60 Hz 7.0 Amp
Has Filter
Expedited ship...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 HP 1770 RPM 180L Frame 230/460 Volt 3 Phase 60 Hz 77.0/38.5 Amp 4.5" Shaft Length 47.6 mm (1.8...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
HT2/SUVA/SSA/20678/20 ERC 23/1-E Expedited shipping services are available This piece is located ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 120 Ton Toshiba Injection Molding Machine Model: ISF120SII-3A Serial: 265509 Expedi...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Expedited shipping services are available This piece is located at Ideal Machinery, Inc. on our s...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
PVH98QPC-RF-IS-10-C145V19-31-091 Shaft: 2" x 1 1/4" Removed from: 120 Ton Van Dorn Injection Mold...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4WRKE35W2-0000-21/6A24EZ9/D3MR HSE 10B 06A 001-31/M00 ZDR 6 DP0-4/4-YM W80 4WRAP 6 W7-08-21/24K4/...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
NGDH 2440-000724T5 Removed from: 200 Ton Ferromatik Injection Molding Machine Model: K-TEC200S Se...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
BL Super P6 3.5 Kw AC 200 V 24.0 A 3 Phase Removed from: 150 Ton Toyo Injection Molding Machine M...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shell 300 PSI Temp 300 F Tubes 150 PSI Approx. Dimensions: 40" x 11" x 12" Expedited shipping ser...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 HP (22 kW) Output 4 Poles 1455/1755 RPM 180M Frame 220/440 Volt 3 Phase 60 Hz 71/36 Amp 4.25" ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.