Advanced Filters
Category
Manufacturer
CPU2-03H Removed from: 180 Ton Mitsubishi Injection Molding Machine Model: 180MJ-17 Serial: P1615...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
0.87 kW 3325 RPM 208-230 / 416-460 Volt 3 Phase 60 Hz 4.4 / 2.2 Amp Isolator block is chipped nea...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 mm Dimensions: 27 5/8 x 3 x 3 Weight: 42 lbs Removed from: 85 Ton Van Dorn Injection Molding M...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 mm Dimensions: 27 5/8 x 3 x 3 Weight: 43 lbs Removed from: 85 Ton Van Dorn Injection Molding M...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
(4) Piece 180 mm Expedited shipping services are available This piece is located at Ideal Machine...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 400 Ton Van Dorn Injection Molding Machine Model: 400RS-48FHT Serial: 286 Expedited...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
15 kVA 480 High Voltage, 18 Amps Delta 240 Low Voltage, 36.1 Amps Delta 3 Phase 60 Hz Type 2 Encl...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
115/220 Volt 50/60 Hz .5 /.25 Amp Max Has small scratches on top Expedited shipping services are ...
$1,000 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Unit Rev F Bios/FMW 24 KBD 120 QC/DT DH **Missing Back Panel** **No Operating System** **No Hard ...
$1,000 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: SP-1214-120A Removed from: 650 Ton Van Dorn HT Injection Molding Machine Model: 650HT125 S...
$24 (USD)
Model: SP-1214-120A Removed From: 500 Ton Van Dorn Injection Molding Machine Model: 500H-RS-VV-60...
$24 (USD)
30 Amps @ 600 VAC Resistive Contacts Normally Open Coil: 120 Volt, 50/60 Hz Dimensions: 4 1/4 x 4...
$24 (USD)