Advanced Filters
Category
Manufacturer
Model: SRH04
Serial: 30E0566
Buyers are welcome to inspect equipment prior to purchase.
Expedi...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Hopper w/Lid 22X20HOP
4" Cylinder Height
19" Cone Height
5.25" x 5.25" Flange
3.75" x 3.75" F...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Top Opening: 7" Bottom Opening: 2" Holes 6" Center to Center Approx. Dimensions: 11 1/2" X 9 1/2"...
$25 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Hopper Transition Mount HOP-TM
8" x 8" Holes Center to Center
75 mm Inside Diameter Top
3" x 1...
$79 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1500 lb Capacity Hopper with Heater 38" Inside Diameter 10" x 10" Flange 9" Holes Center to Cente...
$4,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
THORESON MCCOSH Hopper
Floor to the top of the stand: 83 1/2 inches
Cylinder height: 78 inches
...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from:
Toshiba Injection Molding Machine
Model: ISF 120S II-5A
Serial: 384708
Expedite...
$125 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Approx. .87 Oz. Shot Size
Removed from:
40 Ton Van Dorn Demag Injection Molding Machine
Model:...
$995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
691-91266-00
Expedited shipping services are available upon request.
All taxes due are the resp...
$185 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1.10" (28 mm) Screw Diameter
Removed from:
80 Ton Krauss Maffei Injection Molding Machine
Mode...
$1,895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 Oz Shot Size
1.18" (30 mm) Screw Diameter
20,300 PSI Injection Pressure
5.3" Injection Strok...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TOSHIBA 8.1 Oz Injection Unit ISE120-5A / IU
8.1 Oz Shot Size
1.57" (40 mm) Screw Diameter
26,...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.