Advanced Filters
Category
Manufacturer
4051-254
Removed from: Milacron Injection Molding Machine
Model: M H 500-76
Serial: H05A040003...
$52 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
24 VDC
Removed from: Milacron Injection Molding Machine
Model: M H 500-76
Serial: H05A0400037
...
$52 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Normally Open Contacts
Rating Per Pole: 35 Amps @ 600 VAC RES
Coil: 120 Volt, 50/60 Hz
Removed...
$25 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Normally Open Contacts
Rating Per Pole: 35 Amps @ 600 VAC RES
Coil: 120 Volt, 50/60 Hz
Removed...
$25 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Normally Open Contacts
Rating Per Pole: 35 Amps @ 600 VAC RES
Coil: 120 Volt, 50/60 Hz
Removed...
$25 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DGMPC5ABKBAK30 Pilot Operated Relief Valve 315 Bar (4570 PSI) Removed from: 300 Ton Van Do...
$45 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: HLC-08-2P1R3-S-9868B Dimensions: 7 3/4 x 3 3/4 x 3 3/8 Weight 9 lbs, 14.1 oz Removed from:...
$68 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: CR353AD3D*1 Series A Single Phase, 2 Pole 3 Phase, 3 Pole 240/480/600 VAC 240/200/160 LR A...
$9 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Normally Open Contacts
Rating Per Pole: 35 Amps @ 600 VAC RES
Coil: 120 Volt, 50/60 Hz
Removed...
$25 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft height: 3"
Shaft diameter: 44 mm
Removed from:
120 Ton Van Dorn Injection Molding Machin...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 2 1/4"
Shaft Diameter: 22 mm
Removed from: 300 Ton Engel Injection Molding Machin...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
With Lid / Lid Cutout is 12" diameter
Lid outlet: 3 3/4
Cylinder Outer Diameter: 25 1/4"
Cylin...
$499 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.