Advanced Filters
Category
Manufacturer
PVH98QPC-RF-IS-10-C145V19-31-091 Shaft: 2" x 1 1/4" Removed from: 120 Ton Van Dorn Injection Mold...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
4WRKE35W2-0000-21/6A24EZ9/D3MR HSE 10B 06A 001-31/M00 ZDR 6 DP0-4/4-YM W80 4WRAP 6 W7-08-21/24K4/...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
NGDH 2440-000724T5 Removed from: 200 Ton Ferromatik Injection Molding Machine Model: K-TEC200S Se...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
BL Super P6 3.5 Kw AC 200 V 24.0 A 3 Phase Removed from: 150 Ton Toyo Injection Molding Machine M...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shell 300 PSI Temp 300 F Tubes 150 PSI Approx. Dimensions: 40" x 11" x 12" Expedited shipping ser...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 HP (22 kW) Output 4 Poles 1455/1755 RPM 180M Frame 220/440 Volt 3 Phase 60 Hz 71/36 Amp 4.25" ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
300 PSI Shell Operating Pressure 150 PSI Tube Operating Pressure 300°F Temperature 2.25" Inlet / ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: JSW Injection Molding Machine Model: J165EII-A Serial: 296302428 Expedited shipping...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Expedited shipping services are available This piece is located at Ideal Machinery, Inc. on our s...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
20 HP Shaft: 4 7/8" x 1 5/8" Dimensions: 23 1/2 x 18 x 14 Weight: 264 lbs Removed from: 90 Ton To...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1D703-0004 Removed from: 2200 Ton HPM Injection Molding Machine Model: H2200EP-400 Serial: 94613 ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
with Garlock Klozure Oil Seal Model: 53X2270 Removed from: 85 Ton Van Dorn Demag Injection Moldin...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.