Advanced Filters
Category
Manufacturer
SCRATCH & DENT w/ Hitachi A61L-0001-0074 200 Volt 50/60 Hz 70 Watt **Button covers are worn off**...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
*Pressure Tested Good* Approx. Dimensions: 29" x 7" x 10" Removed from: 500 Ton Engel Injection M...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
18.2 FLA 18 FLA Motor 15 HP 150 PSI Max Pressure 100 XFMR Size 480 Volt 3 Phase 60 Hz **this unit...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 85 Ton Van Dorn Demag Injection Molding Machine Model: 85HT-5 Serial: 0920 Expedite...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SLE-1024-89686 Tested Good Approx. Dims: 30" x 7" x 8" Removed from: 300 Ton Cincinnati Injection...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Akiyama Thermal Research Institute *Pressure Tested* Approx. Dimensions: 40" x 6" x 11" Removed f...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
160/133 CFM Open @ 60/50 Hz with Emerson Electric Motor Model: J810X 2.5 / 1.85 HP J56CZ Frame Te...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Platen Expedited shipping services are available This piece is located at Ideal Machinery, Inc. o...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1D703-0004 Removed from: 2200 Ton HPM Injection Molding Machine Model: H2200EP-400 Serial: 94613 ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 30" Shaft Diameter: 50.4 mm Removed from: 1100 Ton HPM Injection Molding Machine Mo...
$895 (USD)
30 HP (22 kW) 1770 RPM 180L Frame 230/460 Volt 3 Phase 60 Hz 67.8 / 33.9 Amp Part No.: BC4M030-4D...
$895 (USD)
1 7/8" Inlet / Outlet 1 1/8" Inlet / Outlet *Pressure Tested* Approx. Dimensions: 39" x 6" x 9" R...
$895 (USD)