Advanced Filters
Category
Manufacturer
4TP-2B526
N9GR-11
Removed from:
300 Ton Nissei Injection Molding Machine
Model: FN6000-71A
S...
$299 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
F770 60 19 3 B UM12A-G0I Dimensions: 9 1/8 x 7 1/4 x 1 Weight: 8.6 oz Removed from: 35 Ton Meiki ...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Pre Fill Valve Cylinder Removed From: 275 Ton Van Dorn Injection Molding Machine Model: 275HP-14 ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 kW (40 HP) 1455 / 1755 RPM 180M Frame 4 Poles 220/440 Volt 3 Phase 60 Hz 96 / 48 Amp 4" Shaft ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
60 lbs/hr 1 HP Blower Motor 8.0 kVA 460 Volt 3 Phase 60 Hz 16.6 Amps Tested Good Expedited shippi...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
30 HP (22 kW) 1180 RPM 180L Frame 460 Volt 3 Phase 60 Hz 4.75" Shaft Length 47.3 mm (1.86") Shaft...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
20 Gallon Tank Capacity 5.9 GPM Pump Flow 1500 PSI Max Pressure 5 HP Motor Tested Good Expedited ...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3.25" Shaft Length 4.20 mm Shaft Diameter Expedited shipping services are available This piece is...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
2.25" Diameter Removed from: 90 Ton Toyo Plastar Injection Molding Machine Model: Ti-90G2 Serial:...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 265 Ton Kawaguchi Injection Molding Machine Model: JEKS-265 Expedited shipping serv...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
1.02" (26 mm) Shaft Diameter 2" Shaft Length Expedited shipping services are available This piece...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: PC330-025 Rev C with Memory Board Model: PC330-030 Rev B Used with: Pathfinder 1000, 2000,...
$895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.