Advanced Filters
Category
Manufacturer
341335 B
Removed from:
400 Ton Van Dorn Demag Injection Molding Machine
Model: 400HT48
Serial...
$1,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
341355 B
Removed from:
400 Ton Van Dorn Demag Injection Molding Machine
Model: 400HT48
Serial...
$1,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
341355 B
ST
Removed from:
400 Ton Van Dorn Demag Injection Molding Machine
Model: 400HT48
Se...
$1,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
460 Volt
3 Phase
60 Hz
29 F.L. Amp
https://www.conairgroup.com/product/rg-series-vacuum-pump/...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Table Top: 42.5" x 40.5"
Tested Good
Buyers are welcome to inspect equipment prior to purchase....
$1,295 (USD)
75 kVA
480 High Voltage
240 Low Voltage
3 Phase
60 Hz
Type K
Removed from:
450 Ton Engel I...
$1,495 (USD)
480 Volt
3 Phase
with Baldor Motor
Cat. No. M3709T
7.5 HP
3450 RPM
213T Frame
with Roots D...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
350202
68926S0
217366
132" Shaft Length
27 mm Shaft Diameter
Removed from:
400 Ton Van Dorn...
$2,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Long Distance Positive Displacement Vacuum Pump
7.5 HP Motor
460 Volt
3 Phase
60 Hz
9 F.L. A...
$8,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
350202
68926S0
217366
132" Shaft Length
27 mm Shaft Diameter
Removed from:
400 Ton Van Dorn...
$2,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
119.99 mm Diameter Approx.
4.5" x 4.5" Center to Center Small Bolt Holes
Removed from:
400 Ton...
$399 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
0 811 404 303
Removed from:
230 Ton Van Dorn Injection Molding Machine
Model: 230-RS-20F-VV-HT...
$2,250 (USD)