Advanced Filters
Category
Manufacturer
2 INCH SHAFT
35.6 MM SHAFT
Removed from:
Meiki Injection Molding Machine
Model: MDMI
VT-1000...
$249 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
CR075PT430SDJAS137J
091685040
2 1/8 SHAFT INCHES
35.1 MM SHAFT
Removed from:
Meiki Injection...
$249 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
20 HP
5" Shaft Length
47.7 mm (2") Shaft Diameter
**The original motor nameplate was missing a...
$595 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 1 5/8"
Shaft Diameter: 25.69 mm
Removed from:
300 Ton Van Dorn Injection Molding...
$125 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
CHAR LYNN 101 1032 007
Shaft Length: 1 3/4"
Shaft Diameter: 25.38 mm
Removed from:
85 Ton Eng...
$125 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Staffa HM/C080/0/6C/45/F3/C17/31/PL458 Motor
Buyers are welcome to inspect equipment prior to pu...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
7.5 KW
400/230 V
3 PH
Shaft diameter: 38.09 mm
Shaft length: 3 1/2
Removed from: 250 Ton Van...
$599 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 1 3/4"
Shaft Diameter: 25.49 mm
Removed from:
500 Ton Van Dorn Injection Molding...
$82 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Engel Robot and Cabinet
Model: ERC 43/2-E
Serial: 162097
Buyers are welcome to i...
$1,295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft Length: 6 1/2"
Shaft Diameter: 31.67 mm
Removed from:
Meiki Injection Molding Machine
M...
$82 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
115 Volt
Single Phase
60 Hz
0.5 Amp
1 RPM
40°C Max Ambient Temp
Expedited shipping services...
$160 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
3 HP Motor C182T17FK13D
Cat. No: G130326.00
HP: 3
Volt: 208-230 / 460; Tested at 460
Hz: 60
...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.