Advanced Filters
Category
    Manufacturer
    Used FANUC 5.36 HP AC Servo Motor A06B-0247-B605 Used

    FANUC 5.36 HP AC Servo Motor A06B-0247-B605 Used

    Model: α22/3000i 230 Volt 11 Amp Speed: 3000 min-¹ Freq: 200 Hz 3 Phases Power Factor: 96% Output...
    $495 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used CHAR LYNN Die Height Hydraulic Motor 101 2169 009 Used

    CHAR LYNN Die Height Hydraulic Motor 101 2169 009 Used

    Approx. Shaft Diameter: 1.24 in. Approx. Gear Diameter: 2.23 in. Shaft Length: 4 1/8 in. Dimensio...
    $82 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used VEXTA AXUM540-GN

    VEXTA AXUM540-GN Brushless Motor Used

    AXUM540-GN 2000r/min 40W IP65 5/8 INCH SHAFT 8.1 MM SHAFT Expedited shipping services are a...
    $79 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used CHAR LYNN 101 1032 007

    CHAR LYNN 101 1032 007 Die Height Adjustable Motor USED

    Shaft Length: 1 5/8" Shaft Diameter: 25.69 mm Removed from: 300 Ton Van Dorn Injection Molding...
    $125 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used CHAR LYNN 101 2169 009

    CHAR LYNN 101 2169 009 DIE HEIGHT ADJUSTABLE MOTOR USED

    Shaft Length: 6 1/2" Shaft Diameter: 31.67 mm Removed from: Meiki Injection Molding Machine M...
    $82 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used CHAR LYNN 101 1032 007

    CHAR LYNN 101 1032 007 Die Height Adjustable Motor USED

    CHAR LYNN 101 1032 007 Shaft Length: 1 3/4" Shaft Diameter: 25.38 mm Removed from: 85 Ton Eng...
    $125 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used CHAR LYNN 101 2169 009

    CHAR LYNN 101 2169 009 DIE HEIGHT ADJUSTABLE MOTOR USED

    Shaft Length: 1 3/4" Shaft Diameter: 25.49 mm Removed from: 500 Ton Van Dorn Injection Molding...
    $82 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used BRUENINGHAUS HYDROMATIK Hydraulic Motor HPN716096 Used

    BRUENINGHAUS HYDROMATIK Hydraulic Motor HPN716096 Used

    Part No: 00979105 Shaft: 1 1/2" Expedited shipping services are available This piece is located a...
    $544 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used TOSHIBA 40 HP Induction Motor JIS C 4004 40 HP USED

    TOSHIBA 40 HP Induction Motor JIS C 4004 40 HP USED

    40 HP (30 kW) 4 Pole 1745 RPM 180M Frame 230/460 Volt 3 Phase 60 Hz 96/48 Amp Type TIKK 4.75" Sha...
    $995 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used DANFOSS Motor OMT 200 Used #135555

    DANFOSS Motor OMT 200 Used

    Motor OMT 200 Removed from: 90 Ton Engel LIM Injection Molding Machine Model: ES500/90HL Seri...
    $699 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    Used CHAR LYNN Hydraulic Screw Motor 111 1037 004 Used

    CHAR LYNN Hydraulic Screw Motor 111 1037 004 Used

    Model: 111 1037 004 276 1.5" Shaft Length 32.2 mm Shaft Diameter Removed from: 85 Ton Van Dorn In...
    $595 (USD)
    Details
    Used ANTRIEBSTECHNIK Motor 3323793 USED

    ANTRIEBSTECHNIK Motor 3323793 USED

    KW: 18 - 24 HP Volt: 230/460 Amp: 60/30 Hz: 60 RPM: 1760 60 Hz Tested Good Removed from: 75 Ton A...
    $699 (USD)
    Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
    Details
    12244896