Advanced Filters
Category
Manufacturer
KOLLMORGEN MTC308C1-R1C1 Servo Motor
Shaft Length: 1"
Shaft Diameter: 12.59 mm
Removed from:
...
$2,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
KOLLMORGEN MTC504C1-R1A1-013 Servo Motor
Shaft length: 2"
Shaft diameter: 18.84 mm
Expedited s...
$1,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
TRQ. (Stall) 23 Nm Amp (Stall) 20 Amp 3 Phase 8 Pole 2000 RPM 146 Volt Expedited shipping service...
$2,500 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft: 2 3/4" 4400 Watt 28.4 Nm 1500 r/min 32.8 Amp 200 Volt Dimensions: 13 1/4 x 7 1/8 x 11 1/2 ...
$2,682 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft: 2" Br. 24 Volt 7,4 kW 6000 min-¹ Uzk=540 Volt lo = 11,9 Amp Mo = 10,5 Nm Expedited shippin...
$3,045 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Brushless 180 Volt 7.5 Amp 1.29 kW 3000 RPM Voltage Constant 0.453 Vs IP64 Rated Torque @ Locked ...
$1,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: GYS401DC1-CA
2 7/8" Shaft Length
25 mm Shaft Diameter
Removed from:
Meiki Injection Mo...
$99 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SHAFT LENGTH: 1.5
SHAFT DIAMETER: 14.67 MM
Removed from:
Meiki Injection Molding Machine
Mode...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SHAFT LENGTH: 1 1/4
SHAFT DIAMETER: 14.26 MM
Removed from:
Meiki Injection Molding Machine
Mo...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SHAFT LENGTH: 1
SHAFT DIAMETER: 14.25 MM
Removed from:
Meiki Injection Molding Machine
Model:...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SHAFT LENGTH: 13.97MM
Expedited shipping services are available.
This piece is located at Ideal...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SHAFT LENGTH: 1
SHAFT DIAMETER: 29.47 MM
Removed from:
Meiki Injection Molding Machine
Model:...
$200 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.