Advanced Filters
Category
Manufacturer
Shell: 250 PSI Tubes: 150 PSI Temp: 350° F Mounting brackets broken Approx. Dimensions: 22" x 10"...
$704 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SCRATCH & DENT Shell: 250 PSI Tubes: 150 PSI Temp: 350° F Mounting brackets broken Approx. Dimens...
$704 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Type QMS 7.50 kVA 60 Hz Single Phase Primary Volts: 240, 480 Secondary Volts: 120, 240 Expedited ...
$705 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Type QMS 7.50 kVA 60 Hz Single Phase Primary Volts: 240, 480 Secondary Volts: 120, 240 Expedited ...
$705 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
SPEC: 35B15-372 Shaft Diameter: 5/8" 1 ½ HP 230/460 Volts 4.8/2.4 Amps 1725 RPM 60 Hz Unit has Co...
$159 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
45 kVA 480 High Voltage 240 Low Voltage 3 Phase 60 Hz Type K Delta Y Tested Good Removed from: 15...
$1,195 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: Cincinnati Injection Molding Machine
Model: MM1100-232
Expedited shipping service...
$1,895 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
CRT Board Removed from: 90 Ton Toyo Plastar Injection Molding Machine Model: Ti-90G2 Serial: 1087...
$800 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: P14206 CRT Board Expedited shipping services are available This piece is located at Ideal ...
$955 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
MFG. DWG Z398032 Pickup Unit Sanyo Denki Type: 2GB-036AMZ Expedited shipping services are availab...
$723 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Input: 200 VAC Dimensions: 13 1/8 x 6 x 8 1/8 Weight: 19 lbs Removed from: 88 Ton Nissei Injectio...
$750 (USD)
5.5 KW 32 Amp 200 VAC Removed from: 88 Ton Nissei Injection Molding Machine Model No: ES1000 Seri...
$795 (USD)