Manufacturer

Used ENGEL 10.32 Oz Injection Unit ES700/200-10 / IU USED #131591

10.32 Oz Shot Size 1.772" (45 mm) Screw Diameter 30,502 PSI Injection Pressure 7.87" Injection St...

$3,950 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used ENGEL 37 Oz Injection Unit ES2000/450 / IU USED #81945

37.47 Oz Shot 22,582 PSI Injection Pressure 11.81" Injection Stroke 2.756" (70 mm) Screw Diameter...

$4,950 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used STAFFA Screw Motor 26083 USED #135179

37/94 A95PM0534 4" Shaft Length 6.18 mm Shaft Diameter Removed from: 500 Ton Engel 57 Oz Injectio...

$4,950 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used ENGEL 31.8 Oz Injection Unit ES1350/350 HLST / IU USED #132436

31.8 Oz Shot Size Removed from: 350 Ton Engel Injection Molding Machine Model: ES1350/350 HLST Se...

$4,950 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used ENGEL 10.3 Oz Injection Unit ES650/135TL / IU USED #130092

10.3 Oz Shot Size 1.772" (45 mm) Screw Diameter 29,580 PSI Injection Pressure 25-297 RPM Screw Sp...

$5,995 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used ENGEL 63 Oz Injection Unit ES 4400/750/68 / IU USED #65836

63 Oz Shot 32,470 PSI Injection Pressure 15.35" Injection Stroke 3.15" (80 mm) Screw Diameter 20:...

$7,950 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used ENGEL 80 Oz Injection Unit ES 4400/750 / IU 90MM USED #91046

80 Oz Shot 25,655 PSI Injection Pressure 15.35" Injection Stroke 3.543" (90 mm) Screw Diameter 20...

$7,995 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used CINCINNATI MILACRON Camac VST Operator Interface 3-424-2065A VST USED #89092

Rev D Dimensions: 16 3/4 x 7 7/8 x 4 1/2 Weight: 4 lbs Removed from: 85 Ton Cincinnati Milacron I...

$2,995 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used VAN DORN OP 398K Pathfinder Control 6ES5 398-OKB12 USED #112529

OP 398K Van Dorn Pathfinder Operator Interface Cracks in casing can be seen Removed from: 230 Ton...

$3,750 (USD)

Details

Used KAWATA 600 lb. Insulated Hopper 36X36HOP-A Used

37" Cylinder Height 11" Cone Height 26" Outside Diameter 21.75" Inside Diameter 2" Bottom Flange ...

$795 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used VAN DORN Bullard Gear 300601-1 Used

300601-1 Removed from 230 Ton Van Dorn Injection Molding Machine Model: 230-RS-20F-HT Serial: 065...

$1,295 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used THORESON MCCOSH 16 Zone Vacuum Loader Control TECH 3 Used

T-M Loading System 16 Zones 1 Vacuum Pump 120 Volt 3.0 Amp Single Phase 60 Hz S/N: 201-813901 *...

$1,995 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Category

Manufacturer