Advanced Filters
Category
Manufacturer
5031520 85 mm (3.35") Inside Diameter 60 mm (2.36") Inside Diameter Removed from: 300 Ton Cincinn...
$1,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
100 mm (3.94") Diameter 70 mm (2.76") 2293 Removed from: 440 Ton Cincinnati Milacron Injection Mo...
$2,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
5 Oz Shot Size Removed from: 450 Ton Engel Injection Molding Machine Model: ES 1300/450 Serial: 7...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Removed from: 440 Ton Cincinnati Milacron Injection Molding Machine Model: VT440-54 Serial: T39A0...
$2,250 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
2.75" Diameter Large Hole 1 1/3" Diameter Small Hole A11U6 M6H Removed from: 265 Ton Kawaguchi In...
$2,495 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
10.2 Oz Shot 22,500 PSI Injection Pressure 1.77" (45 mm) Screw Diameter 20:1 L/D Ratio Dimensions...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
32.25" x 32.25" Platens K34089002 02-140 K34089402 D46/02 480 Volt 60 Hz 10.6 Amp 5.07 kVA Remove...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
7.5 Ton Water Cooled Pump Size: 1.5 460 Volt Inlet / Outlet: 2 1/2" R-22 Refrigerant @ 10 lbs Pow...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
10 Oz Shot Size 1.772" (45 mm) Screw Diameter 21,400 PSI Injection Pressure 7.1" Injection Stroke...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Type: 6ES5398-OKB1 24 Volt OP 398K OP398K This OP is compatible with Van Dorn HT 85-650 Ton Moldi...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Air Cooled 2 Ton 2 HP Compressor 1/2 HP Pump R134A Refrigerant @ 5 lbs 480 Volt 3 Phase 60 Hz 7.7...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 4WRE 10 EA64-12/24Z4/M-468 Removed from: 200 Ton Engel Injection Molding Machine Expedited...
$3,150 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.