Advanced Filters
Category
Manufacturer
6.7 Oz Shot Size 1.57" (40 mm) Screw Diameter 31,284 PSI Injection Pressure 6.3" Injection Stroke...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
HW: 6.10 A1.3 Input: 18 Volt-30 VDC Input: 1 Amp (24 VDC) Enclosure: Type 12 Amb. Temp: 0-50°C Po...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
225 lbs/hr 35.28 kVA 5.5 HP Blower Motor 44.29 Amp 35.28 kVA 115 Volt Control Circuit Nema 1 480 ...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
EPFRG-06-700-EX-11-S20 EPFRG06700EX11S20 Removed from: 610 Ton Toshiba Injection Molding Machine ...
$1,295 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
New 2015 HW: 6.10 A1.3 Input: 18 Volt-30 VDC Input: 1 Amp (24 VDC) Enclosure: Type 12 Amb. Temp: ...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
10.3 Oz Shot Size 1.772" (45 mm) Screw Diameter 29,580 PSI Injection Pressure 25-297 RPM Screw Sp...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
150 lb/hr 460 Volt 3 Phase 60 Hz with (2) Una-Dyn Modular 300 lb Drying Hoppers Tested Good Exped...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Input: 18 - 30 VDC Input: 1 Amp (24 VDC) HW: 10.00 A1.3 HW: 1.00 SW: 1.0 Powers On Expedited ship...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 385399 D Removed From: 650 Ton Van Dorn Injection Molding Machine Clamp Unit Expedited shi...
$5,995 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Shaft: 6" Model: 90W 3 Phase Poles: 12 800 RPM 170 Volt Trq. (stall): 324 Nm Amp (stall): 111 Amp...
$6,318 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Linear Motion Control Board: 1989 IDC KD2, Rev A Board: 1996 IDC UMC2, Rev B Missing Cover & Plas...
$180 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
24872
J91PM5280
C25932
Removed from:
120 Ton Van Dorn Injection Molding Machine
Model: 120-R...
$2,950 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.