Advanced Filters
Category
Manufacturer
Husky / Gammaflux 15 Amps Per Zone Expedited shipping services are available This piece is locate...
$363 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: VT5011 S44 R1 Expedited shipping services are available This piece is located at Ideal Mac...
$181 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 21648 Expedited shipping services are available This piece is located at Ideal Machinery, ...
$27 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
080-2463, Rev C 180-2463, Rev A Removed from: 75 Ton Van Dorn Injection Molding Machine Model 75-...
$27 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
10 Amp 3 Pole Removed from: 120 Ton Nissei Injection Molding Machine Model: FS120S18ASE Serial: S...
$14 (USD)
2.00 kVA Single Phase 60 Hz Type: IP Primary Volts: 240/480 Secondary Volts: 120/240 Removed from...
$165 (USD)
Simatic S5 64K x 8 Bit Van Dorn Control Part Removed from: 230 Ton Van Dorn Injection Molding Mac...
$48 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: DG4V-3-2A-M-P2-T-7-P10-50 Dimensions: 6 x 1 7/8 x 3 1/2 Weight 3 lbs Removed from: 150 Ton...
$136 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: D4C-3402 4 Amp 30 Volt Removed from: 150 Ton Sumitomo Injection Molding Machine Model: SH1...
$29 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 5038621 Removed from: 33 Ton Cincinnati Milacron Injection Molding Machine Model: VS33-2.9...
$199 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
100 mm (3.94") Approx. Hole Diameter Removed from: 220 Ton Cincinnati Milacron Injection Molding ...
$349 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.
Model: 308078 45843J 47.56 mm (1.87") Approx. Inside Diameter Removed from: 85 Ton Van Dorn Demag...
$181 (USD)
Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.