Manufacturer

Used CONAIR WORTEX 5 HP Grinder / Granulator JC-5 Used

9" x 7" Throat Size 5 HP Closed Rotor 7 Blade 1/4" Screen Hole Size Year: 1987 Tested Good Expedi...

$1,895 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used FANUC Servo Amplifier Drive A06B-6079-H107 Used

Input: 283-325V Removed from: 220 Ton Milacron Injection Molding Machine Model: NT 220-29 Serial:...

$1,816 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used CINCINNATI MILACRON Processor Module 3-424-1942A Used

w/ Board: 3 531 4231 A, Rev C by Cincinnati Milacron w/ Board: MS-4 by Crydom Controls Expedited ...

$1,817 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used YASKAWA Servopack SGDB-44ADG-PY276B Used

AC Input: 200-230 Volts 50/60 Hz 3 Phase 24.0 Amps AC Output: 0-230 Volts 3 Phase 32.8 Amps 4.4 k...

$1,817 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used NISSEI Operator Panel CONTROL PANEL786 Used

Dimensions: 26 3/4 x 11 1/2 x 10 Weight: 20 lbs, 9 oz Removed from: Nissei Injection Molding Mach...

$1,881 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used HUSKY 10 Zone Hot Runner GLC2K-H030D-10 Used

240 Volt 3 Phase 30 Amp Tested Good Expedited shipping services are available This piece is locat...

$1,895 (USD)

Details

Used KRAUSS MAFFEI Injection Unit KM160-750 CX / IU Used

Approx. 10.5 Oz 1.57" (40 mm) Screw Diameter Screw diameter [mm]:45 Injection volume [cm3]:318 In...

$1,895 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used ENGEL 8.3 Oz Injection Unit ES200/330/250 / IU Used

8.3 Oz Shot Size 1.7725" / 45 mm Screw Diameter 21,765 PSI Injection Pressure 6.3" Injection Stro...

$1,895 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used NOVATEC 220 CFM Desiccant Dryer NPD-220 Used

220 lbs/hr 23.7 kVA 30 Amps 460 Volt 3 Phase 60 Hz 3.75" Inlets / Outlets Dims: 60 x 39 x 62 Weig...

$1,895 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used ITT STANDARD Heat Exchanger 5-030-08-072-005 Used

300 PSI Shell Max Working Pressure 150 PSI Tube Max Working Pressure 300°F Temperature Approx. Di...

$1,895 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Used THERMAL TRANSFER Heat Exchanger RA-1660-96792 Used

250 PSI Shell Working Pressure 150 PSI Tube Working Pressure 350°F Temperature 61.75" Cylinder Le...

$1,895 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

220 Lbs Per Hour 3.75" Inlets / Outlets 220 lbs/hr 25 kVA 31.5 Amps 3.75" Inlets / Outlets w/ Bal...

$1,895 (USD)

Upon submitting an inquiry, a representative will reach out shortly to discuss your shipping options and costs.

Details

Category

Manufacturer